Page 15 - Copyright Llaza, S.A. - May 2011
Assembly instructions
8. Double MONOBOX-400 with central transmission (optional)
Insert the centre bracket into
the square bar at the end with
the bearing in it, as shown in
the drawing. There is a left-
hand and right-hand version of
the centre bracket, to be used
depending upon how the sys-
tem was initially assembled.
V
U
Before inserting this bracket into the square bar, be sure to
insert the nut
(U)
, which along with the stud
(V)
, will later be
used to attach the other part of the square bar.
This first bar will be tightened to this centre bracket using the
same system as used for the side bracket.
Attach the cassette profiles to the bracket
using the screws
(B)
, and then tighten the
bracket to the square bar with the allen bolt
(A)
.
Insert the other square bar into the centre
bracket, and hold it in position using the
stud
(V)
and the previously positioned nut.
V
A
B
MONOBOX-400
