LK LD Series, Инструкция пользователя

Страница: 17 / 48

- 17 -
Safe working load Model
Hoist motor output(kW)
at 3phase
Power S/W
Capacity (A)
Fuse capacity
(A)
50Hz 60Hz
1tone, 2tone LT-type 1.5 20 15
1 tone,2tone,2.8tone LD-type 1.8, 2.0 20 15
Safe working load
Hoist motor
output
Horizontal motor
output(kW) at 220V
Power S/W
Capacity (A)
Fuse capacity
(A)
1 tone,2tone,2.8tone
refer to 2point
button table
0.2, 0.3, 0.3/0.15 20 20
Ⅱ. Repairing
1. Electric Current Operations
1.Grounding
LT, LD style hoist has a line which goes from a power source to a motor. This line should
be connected to a ground-wire. No matter there is a trolley, a green line among the four (a
black, white, red and green) is a direct line.
You can find an ground-wire as follows ;
After powered, if the up-and-down motion is reversed, alter the black with red line such as
follow picture.
*For setting-up in the out-door, there should be sufficient grounding facilities against
lightening damage. (Need to found a lightening shield : standardized by each country)
* Set up the power breaker considering the height for a view point (from 0.7~1.7M)
2. Capacity of current switch ant fuse
Power switch doesn't run parallel with other electric motor. Use exclusive only.
♦ Electric chain hoist, Gear, Play trolley, electric chain hoist double coursed button.
♦ Electric trolley, electric hoist four coursed button
*The upper table shows the standard volume of power switch and fuse.
It isnt' applicable to every cases
*As the chain hoist is a four coursed (up, down, right, left) move a cross lever.
*Equalize the load to the capacity.
*In case lack of fuse, replace by better one.
3. Power tire depth