LIXiSE LXC9210, Руководство пользователя

Страница: 5 / 58

LXC9220/LXC9210
Series Genset Controller
Dongguan Tuancheng Automation Equipment Co.,LTD.
LXC9220/LXC9210 Product User Manual Dongguan Tuancheng Automation Equipment Co.,LTD.
� :
T:+86-769-23836636
� :
F:+86-769-23166296
� :
www.lixise.com Page 5 of 58
2.
2. 2.
2. Summary
Summary Summary
Summary
LXC92X0 Series of power plant automation controller for the automation and monitoring system of a
single diesel generator sets, use 32-bit microprocessor technology, achieve generator sets automatic
boot/shutdown, the precision measurement of various parameters, alarm protection and three remote
function. The controller uses a large-screen LCD (240*128LCD)graphics display, all the important
parameters can be displayed in page, save the page. At the same time can be displayed Chinese
、
English
and other languages, all parameters can be adjusted from the controller panel, can also be a PC through
a USB interface tweaks and RS485 or GPRS remote adjustment and monitoring. Its structure is compact,
simple wiring, high reliability, automation control systems are widely used in all types of generator sets
and fire pumps.
3.
3.
3. 3. Performance
Performance
Performance Performance and
and
and and characteristics
characteristics
characteristics characteristics
LXC9210 LXC9210 LXC9210 LXC9210
：
Auto Start Module. It controls gen-set to start or stop automatically by remote start signal.
LXC9220 LXC9220 LXC9220 LXC9220
：
Auto Main Failure, updates based on LXC9210, especially for automatic system composed by
gens and mains.
Main Main Main Main characteristics characteristics characteristics characteristics....
� With ARM-based 32-bit MCU, highly integrated hardware, new reliability level;
�
240x128 LCD with backlight, multilingual interface(including English, Chinese or other languages)
which can be chosen at the site, making commissioning convenient for factory personnel;
�
All parameters can use the computer via USB, RS232, RS485 interface to connect and adjust, while
the internal FLASH memory within the controller in the system when power is not lost;
�
99% of the parameters can be set directly from the front panel for easy on-site commissioning;
�
RS485 communication port enabling remote control, remote measuring, remote communication via
ModBus protocol (controller with RS485 port only);
�
Equipped with SMS(Short Message Service)function. When genset is alarming, controller can send
short messages via SMS automatically to max.5 telephone numbers. besides, generator status can
be controlled and checked using SMS. With advanced networking capabilities, via GPRS mobile
network and Internet connectivity, in any place where the network can be remotely monitor;( Need to
install the GPRS module: LXI680);
�
Equipped with CANBUS port and can communicate with J1939 genset. Not only can users monitoring
frequently-used data (such as water temperature, oil pressure, speed, fuel consumption and so on) of
ECU machine, but also control starting up, shutdown , raising speed and speed droop via CANBUS
port. (controller with CAN BUS port only);
� Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with
voltage 120/240V and frequency 50/60Hz;
�
Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains;
� For Mains, controller has over and under voltage, over and under frequency, loss of phase and phase
sequence wrong detection functions; For generator, controller has over and under voltage, over and
under frequency, loss of phase, phase sequence wrong, over and reverse power, over current
functions;
� 3 fixed analog sensors(temperature, oil pressure and liquid level),more kinds of curves of
temperature,oil pressure, fuel level can be used directly and users can define the sensor curves by
themselves;
�
2 configurable sensors can be set as sensor of temperature, pressure or fuel level;
� Protection: Automatic start/stop of the genset, ATS(Auto Transfer Switch)control with perfect fault
indication and protection function. When multiple warnings occur, the warning bar will rotate to
display them, so that we can analyze the reasons;