LIXiSE LXC9210, Руководство пользователя

Страница: 49 / 58

LXC9220/LXC9210
Series Genset Controller
Dongguan Tuancheng Automation Equipment Co.,LTD.
LXC9220/LXC9210 Product User Manual Dongguan Tuancheng Automation Equipment Co.,LTD.
� :
T:+86-769-23836636
� :
F:+86-769-23166296
� :
www.lixise.com Page 49 of 58
79 Mains Reverse Phase When phase sequence of 3 phase input mistake.
80 Mains Loss Of Phase Action in mains loss Of Phase.
81 High Temp Warn Action in high temperature warning alarm.
82 Low Temp Warn Action in low temperature warning alarm.
83 High Temp Shutdown Action in high temperature Shutdown alarm.
84 Low Oil Pressure Warn Action in low oil pressure warning alarm.
85
Low Oil Pressure
Shutdown
Action in low oil pressure shutdown.
86 OP Sensor Open Action when oil pressure sensor are open circuit.
87 Low Level Warn Action when controller has low oil level alarm.
88 Config1 High Warn
89 Config1 Low Warn
90 Config1 High Shutdown
91 Config1 Low Shutdown
92 Config2 High Warn
93 Config2 Low Warn
94 Config2 High Shutdown
95 Config2 Low Shutdown
96-
102
Aux Input 1-7 Active
103 Reserved
104-
109
Custom Period 1-6
110-
115
Custom Combined 1-6
11.6. 11.6. 11.6. 11.6. D D D Defined efined efined efined period period period period output output output output
Defined Period output is made of 2 parts, period output S1 and condition output S2 .
While S1 and S2 are TRUE synchronously, OUTPUT;
While S1 or S2 is FALSE, NOT OUTPUT;
Period output S1, can set generator’s one or more period output freely, can set the delayed time and
output time after into period.
Condition output S2; can set as any conditions in output ports .
NOTE NOTE NOTE NOTE
：
when delay time and output time both are 0 in period output S1, it is TRUE in this period .
Example
：
Output period
：
start
Delay output time
：
5s
Output time
：
3s
Condition output contents: output port 1 is active (Valid / Invalid
：
close when active/disconnect when
inactive
）
Output port 1 active, after enter “starts time” and delay 5s, this defined period output is outputting, after 3s,
stop outputting.
As
As As
As shown
shown shown
shown below
below below
below