LXC9220/LXC9210
Series Genset Controller
Dongguan Tuancheng Automation Equipment Co.,LTD.
LXC9220/LXC9210 Product User Manual
Dongguan Tuancheng Automation Equipment Co.,LTD.
�
:
T:+86-769-23836636
�
:
F:+86-769-23166296
�
:
www.lixise.com
Page
45
of
58
4.11 Charge Volt(D+)(V)
Disable
4.12 Water Temp(C)
Disable
4.13 Oil Press(KPa)
Disable
4.14 Fuel Level(% )
Disable
4.15 Speed(RPM)
Disable
4.16 Total Hour(s)
Disable
4.17 Engine State
Disable
4.18 Alarm State
Disable
Gens Message
G
e
n
s
G
e
n
s
G
e
n
s
G
e
n
s
M
e
s
s
a
g
e
M
e
s
s
a
g
e
M
e
s
s
a
g
e
M
e
s
s
a
g
e
1
1
1
1
Module:
Module:
Module:
Module:
Genset Module:
2
2
2
2
Hardware
Hardware
Hardware
Hardware Version:
Version:
Version:
Version:
Genset Hardware Version:
3
3
3
3
Software
Software
Software
Software Version:
Version:
Version:
Version:
Genset Software Version:
4
4
4
4
ID:
ID:
ID:
ID:
Genset ID:
11.4.
11.4.
11.4.
11.4. D
D
D
Defined
efined
efined
efined contents
contents
contents
contents of
of
of
of configurable
configurable
configurable
configurable input
input
input
input ports
ports
ports
ports
No.
Type
Description
1
Users Configured
Including following functions:
--------------------------------------------
Warning: warn only, not shutdown.
Shutdown: alarm and shutdown immediately.
Trip and stop: alarm, generator unloads and shutdown after
hi-speed cooling.
Trip: alarm, generator unloads but not shutdown.
Indication: indicate only, not warning or shutdown.
--------------------------------------------
From safety on: detecting after safety on run delay.
From crank: detecting as soon as start.
Always: input is active all the time.
Never: input inactive
2
Alarm Mute
Can prohibit“Audible Alarm”output when input is active.
3
Reset Alarm
Can reset shutdown alarm and trip alarm when input is active.
4
Aux High Temp
Connected sensor digital input.
5
Aux Low OP
Connected sensor digital input.
6
Inhibit Alarm Stop
Prohibit any alarm and shutdown action.
7
Remote Start On
Load
In Auto mode,when input active,genset can be started and with load
after genset is OK;when input inactive, genset will stop automatically.
8
Remote Start Not
On Load
In Auto mode, when input is active, genset can be started and without
load after genset is OK; when input is inactive, genset will stop
automatically.
9
Aux Manual Start
In Auto mode,when input active, genset will start automatically;when
input inactive,genset will stop automatically.
10
Simulation Mains
OK
In Auto mode,mains are normal when input is active.
11
Simulation Mains
Fail
In Auto mode, mains are abnormal when input is active.
12
Panel Lock
Generator related operations are banned, switch query interface can be
used.
13
Inhibit Auto Stop
In Auto mode, during generator normal running, when input is active,
