User manual
6
USE
How to charge the equipment:
Before using the equipment for the first time, it must be fully charged continuously for at least 3 hours.
-
Connect the mains voltage adapter cable to the massage gun.
-
Plug the adaptor into a wall socket.
-
The indicator light turns on in red and will turn on in green when the unit will be fully charged.
-
The average operating time of the device is two hours, depending on the speed and the applied
pressure during the use.
-
It is not recommended to use the massage gun while loading.
How to switch heads:
-
Assembling: insert the desired head into the hole of black connector, press and rotate clockwise it at the
same time until total insertion.
-
Disassembling: Remove the head by exerting strong pressure and rotate it counter-clockwise at the same
time until it comes out.
-
Special U shaped head: insert the head in horizontal position into the hole of the black connector, press and
turn it clockwise at the same time, until it is fully pushed in.
How to use the massage gun:
-
Press the ON/OFF switch to set the unit to level 1 speed, twice to turn the device to level 2 speed, three
times for level 3 speed…etc each push of the button increase by one level up until the speed of level 6.
-
Press 7 times to enter the standby mode (level 0).
-
The device will stop running automatically after 10 minutes of continuous use.
-
Restart again if you want to use it again after the device turn off.