Instruction manual
7
INSTRUCTIONS FOR USE
Never grill your food in the flames.
Flames can be caused by residues of grease and juice dripping onto the burners. To imitate the flames,
clean the burners regularly, when not in use and when the appliance is completely cool.
The burners should ALWAYS be in the low position during cooking.
Protect your hands when cooking with protective gloves.
Do not use in strong winds. Do not use wood or lava stone.
Installation
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.
Connect the hose and regulator to the gas container at the left side of the gas grill. Keeping in mind that
the gas container must be kept away from heat and in a safe position .The hose dimension is 10mm
diameter.
The Length of hose recommended which shall not exceed 1.5m.
Please choose flexible hose whose heatproof higher than 80
℃
How to connect a gas bottle
This appliance is only designed for use with low-pressure butane, propane or their mixture of gases and a
suitable low-pressure regulator using a flexible hose. The hose must be secured to the regulator and the
appliance with hose clamps.
Note : For other countries, cylinder and regulator are dependant on the National Situations in countries of destin
ation.
Never use a dented or rusty gas cylinder.
How to disconnect a gas bottle
a)
Except for twin-cylinder installations with a changeover valve, turn off the gas tap if fitted to the
appliance. Wait until the burner and pilot light have gone out. For installations with a changeover valve,
it is only necessary to switch off the empty cylinder.
b)
Replace the safety cap onto the empty cylinder.
