Instruction manual
7
b)
Turn the grill off as soon as cooking is completed.
c)
Preheat the gas grill for 10 to 15 minutes only.
(Except for the first use)
d)
Do not preheat longer then recommended.
e)
Do not use a higher setting than required.
f)
Connect the hose and regulator to the gas container at the left side of the gas grill. Keeping in mind that
the gas container must be kept away from heat and in a safe position .The hose dimension is 10mm
diameter.
The Length of hose recommended which shall not exceed 1.5m.
Installation
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.
a)
When changing the gas cylinder which shall be carried out away from any source of ignition.
Position
the gas cylinder at left side of your gas grill,
should not be placed inside BBQ, keeping in mind that the
bottle must be kept away from heat and in a safe position.
b)
When ready to use your gas grill insert the regulator into the gas bottle valve and tighten firmly.
Warning:
Before attempting to light your gas grill you must refer to your lighting instructions
and warning / safety points.
Check the hose before each use, searching for cracking, cuts or any abrasions. If the hose is found to be
faulty in any way do not attempt to use your gas grill.
When changing your gas bottle ensures that there are no sources of ignition close by i.e. fires, cigarettes,
naked flames etc. Make sure that the appliance is switched off.
Ensure that the hose is not subjected to twisting
which will affect the gas flow when installing your gas
grill. Also the hose must not have undue tension and must not touch any part of the gas grill which may
be hot.
Please choose flexible hose whose heatproof higher than 80
℃
The hose must be changed when the expiration date printed on the hose is reached. It is necessary to
change the hose when national conditions require it and if found defective.
How to change your cylinder
