Instruction manual
6
TECHNICAL INFORMATIONS
Power: 8,5kW (545.0g/h)
Gas type :
Butane (617g/h) / Propane (606g/h) /
LGP GAS MIXTURES (617.0g/h)
Gas pressure: 28-30mbar
/ 37mbar / 30mbar / 50mbar 37mbar
Injector size: 0,86mm for butane and propane / 0,86mm / 0.75mm 0,82mm for LGP gas mixtures
Side injector size : 0,76mm for butane and propane / 0,76mm / 0.66mm 0,66mm for LGP gas mixtures
INSTRUCTIONS FOR USE
Mounting steps
Make sure your grill is assembled properly. Detailed assembly instructions as below give specific assembly
procedures for each model. Follow these instructions carefully to ensure the correct and safe assembly of
the grill.
Caution:
Although we take every effort to ensure that the assembly process is as easy as possible, it is
inherent with fabricated steel parts that corners and edged can cause cuts if improperly handled during
assembly procedures. Be careful while handling any parts during assembly. It is strongly recommended
that you protect hands with a pair of work gloves
。
Preparation
You will need LPG gas bottle and proper regulators under the gas pressure to operate this gas grill. The
regulators should be comply with
NF for France, BSEN 16129:2013 for other countries
.
Note : For other countries, cylinder and regulator are dependant on the National Situations in countries of destin
ation.
See
Safety precautions
below chapter for farther instructions.
Energy saving tips:
a)
Reduce the opening time of the lid.
