HOW TO USE YOUR EAR AND NOSE HAIR TRIMMER
Operation
Ensure a charged battery is fitted, Refer earlier section “FITMENT OF
BATTERY TO THE NOSE AND EAR HAIR TRIMMER”. Do not use
if the battery is near flat, as the trimmer will not cut hairs efficiently
and may tend to grab and pull hairs.
Trimming operation:
Remove the protecting cap by pulling it from the unit. Switch the
trimmer on, the indicator LED light will activate.
Trimming nose hair:
Make sure nasal passages are clean, Face a mirror and switch on the
unit, the indicator light switch on, then slowly move the cutting head in
and out of each nostril to remove unwanted hair.
Trimming ear hair:
Bring the blade head close to the external part of the ear, and moving
it slowly remove the hairs. Repeat this operation in the other ear.
Trimming beard and sideburns:
For finer detail trimming, the ‘beard and sideburns trimmer head’
can be used.
Remove the nose and ear hair trimmer head by
twisting counterclockwise and lifting off the body.
Fit the beard and sideburns trimmer head by twisting clockwise
onto the body and locking into position.
Start with the edge of the beard line and gently lower the trimmer
blade onto your skin. Slowly draw the trimmer away from the beard
line.
5
A
