HOW TO USE YOUR HAIR CLIPPER
For general hair cutting:
Note: For even cutting, allow the comb attachment/blade to cut its way
through the hair. Do not force it through quickly. If you are cutting for the
first time, start with the largest comb attachment.
STEP 1 – Nape of the neck
Set the comb to 3mm or 6mm.
Hold the clipper with the blade teeth pointing upwards. Begin
starting at the centre of the head at the base of the neck.
Slowly lift the clipper, working upwards and outwards through the
hair, trimming just a little at a time.
STEP 2 – Back of the head
With the comb set at 12mm or 18mm, cut the hair at the back of the
head.
STEP 3 – Side of the head
Set the comb to 3mm or 6mm, trim sideburns. Then change the
setting to 9mm and continue to cut the top of the head.
STEP 4 – Top of the head
Use the longer length comb attachment and set it to 24mm or 27mm
then cut hair on top of the head against the direction in which the
hair normally grows.
Always work from the back of the head.
STEP 5 – The finishing touches
Use the clipper without an attachment comb for close trimming
around the base and
Sides of the neck.
To produce a clean straight line at the sideburns, reverse the hair
clipper. Place the reversed clipper at right angles to the head, tips of
the blades lightly touching the skin and then work downwards.
5
A
