Living & Co BC-8830, Инструкция по эксплуатации

Страница: 10 / 15

Using the Extension Tube and Floor Brush
The extension tube can be fitted onto the air inlet to extend reach, ideal for
floor-to-ceiling cleaning.
STEP 1: Fit the extension tube onto the air inlet by aligning the pins and carefully
pushing the extension tube towards the main unit until it clicks into position. To release
the extension tube, press the extension tube release button and pull it away from the
vacuum cleaner main unit.
STEP 2: Attach the floor brush by aligning the pins on the floor brush with the bottom
of the extension tube. Carefully push together to secure into place. To release the floor
brush, press the floor brush release button and pull it away from the extension tube.
STEP 3: Turn on the vacuum cleaner by pressing the power trigger.
Using the 2 in 1 Crevice and Brush Tool
STEP 1: If required, fit the extension tube onto the air inlet following the instructions in
the section entitled 'Using the Extension Tube and Floor Brush'.
STEP 2: Push the 2 in 1 crevice and brush tool onto the end of the extension tube. If no
extension is required, push the crevice tool directly onto the air inlet until secure.
STEP 3: Slide the brush bar back to use as a crevice tool, ideal for removing dust and
dirt from corners and recesses.
Slide the brush bar forward to use as a brush tool, perfect for cleaning upholstery and fabrics.
STEP 4: To remove the 2 in 1 crevice and brush tool, pull it firmly away from the end of
the extension tube or the air inlet.
Emptying the Dust Container
Before emptying the dust container, check that the vacuum cleaner is switched off and
any attachments have been removed from the air inlet.
It is recommended to empty the dust container outdoors.
STEP 1: Whilst securely holding the vacuum cleaner main unit, press the dust container
base release latch. Empty the dust container slowly and carefully to reduce the amount
of dust released back into the atmosphere.
STEP 2: Close the dust container by pushing the base closed until the dust container
base release latch locks back into position.
Note: Always close the dust container base before using the
vacuum cleaner.
8