Living & Co BC-8830, Инструкция по эксплуатации

Страница: 13 / 15

Troubleshooting
Symptom
Th e vacuum c I eaner
will not charge.
The suction is poor.
Possible Cause
The mains power
adaptor is not securely
connected.
The battery is not
secured properly.
The air inlet is blocked.
The dust container is
almost full.
The HEPA filter is blocked.
The brush bar is not rotating. The brush bar is blocked
due to built-up hair, dust
and debris.
Solution
Connect the mains power
adaptor to the charging port
on the main unit, following
the instructions in the
section entitled 'Charging'.
Check that the battery pack
is secured onto the unit.
Disconnect the attachment
and clear the blockage.
Empty the dust container
following the instructions
in the section entitled
'Emptying the
Dust Container'.
Clean the HEPA filter
following the instructions
in the section entitled
'Cleaning the HEPA filter'.
Clean the floor brush
following the instructions
in the section entitled
'Cleaning the Floor Brush'.
11