23
0800 422 274
NZ
Other Useful Information
Cleaning and care
To prolong the service life of the washing machine, keep it in good condition and
perform regular maintenance.
For any type of cleaning and maintenance, make
sure the washing machine is disconnected from the mains power supply.
Cleaning the washing machine
(when required)
Use a soft cloth to wipe any water or dirt off the washer lid and housing. If using a
damp cloth, squeeze it almost dry to avoid leaving water residues.
• Do not use any chemical, alkaline or abrasive cleaning agents to avoid damaging
the surface.
• Do not spray water directly onto the washer housing.
Cleaning the lint filter
(
suggested interval: every week)
Take out the lint filter as illustrated below. Open the filter and rinse it clean under
running water, taking care not the damage any parts. Reinstall the filter, making sure it
fits securely behind the cover clasp and latches and locks securely into place.
Cleaning the water inlet valve
(suggested interval: every 6 months)
To avoid blockage of the mesh filter at the water inlet after
long time use, detach the water inlet hose, making sure you
have turned off the water supply at the taps beforehand.
Take the mesh filter out of the water inlet valve and clean
the filter with a soft brush. Then assemble the mesh filter
back into the valve and reconnect the water inlet hose.
Cleaning the hose filter
(suggested interval: every 6 months)
To avoid blockage of the hose filter after long
time use, detach the water inlet hose, making
sure you have turned off the water supply at the
taps beforehand. Turn the nut anticlockwise to
take off the hose, clean the filter under running
water or with a soft brush, then reconnect the
hose.
