14
0800 422 274
NZ
Instructions
Before you start washing
A Make sure the washer is stable
and level. If necessary, adjust the
adjustable leg to stabilise the
washer (see page 8).
B Make sure the water inlet hoses
are properly installed (see page 9).
C Plug the machine into a nearby
power point.
D Open the water taps.
E Make sure the drain hose is properly
installed. Hang the upper end of the
hose over the laundry sink or into a
drain spout (see page 11).
F Before using the washing machine
for the first time, run a complete
cycle without laundry items. Select
the NORMAL program and run the
machine until the end of the program.
Normal usage
1. Before washing, remove any coins, keys and other hard items
from pockets. Close any zippers to prevent damaging your
clothes and the wash tub. Brush dirt and sand off clothes and
turn pockets inside out.
2. Sort your washing into appropriate loads: whites,
coloureds, cottons, delicates, heavily soiled, etc.
Place delicate items into a wash bag for protection.
On the back
Install
the drain
hose at a
height of
70-100cm
to prevent
water drain-
age and
overflowing
problems.
A
B
D
C
E
3. Put your washing in the machine, loading items uniformly
in the tub.
4. Add washing detergent (see opposite for details).
5. Press the POWER ON/OFF button.
6. Refer to the Program Selection Guide (opposite) and select a suitable wash
program.
The machine will automatically choose the correct water level and
wash and spin times for the NORMAL and HEAVY DUTY programs, and the
correct water level for the CUSTOM and QUICK programs. Other parameters
can be set individually (see page 16).
7. Close the lid and press the START/PAUSE button.
NOTE: If the washer lid is not closed properly, the washer will sound an alarm and
stop working before spinning.
