![Living & Co 55WM-330 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/living-and-co/55wm-330/55wm-330_instruction-manua_1930872017.webp)
17
0800 422 274
NZ
Instructions (Cont.)
The blanket program
Use this program for washing blankets or other bulky items. It will automatically
select the highest water level, but you can adjust this manually down to a lower level
according to the size of your bulky item(s).
1. Press the POWER ON/OFF button and open the washer lid.
2. Press the PROGRAM button repeatedly and until the indicator for the BLANKET
program flashes.
3. Dissolve an appropriate amount of washing detergent with a little lukewarm water,
then pour the detergent solution directly into the tub of the washing machine.
4. Fold up the blanket and put it into the washing tub, as illustrated below.
5. Close the washer lid.
6. Press the START/PAUSE button for the washing program to start.
7. At the end of the washing program, a buzzer will sound to alert you that the
program has finished before the power is shut off automatically.
8. Close the water taps and unplug the power plug from the wall outlet.
9. We recommend cleaning the lint filter after washing a blanket
(see page 23 for instructions).
NOTE: If you notice that the blanket floats up during the wash, press the START/
PAUSE button, the washer will stop working temporarily. Push the blanket
down and press the START/PAUSE button again to continue washing.
Fold in two by the
Fold 4 times in the
Roll up the blanket.
Put it into the wash tub with
long side.
same direction.
the edge downwards.
Selecting a wash cycle process
On occasion you may want to select a single wash cycle process (or two processes)
instead of a complete program. For example, you may want to spin clothes that got
wet from rain while hanging on the line, or rinse and spin clothes washed by hand.
• To set a spin cycle only, set the SOAK, WASH and RINSE options to “0” and then
select a SPIN time (from 0-9 minutes). Then proceed as described opposite.
• To set a rinse and spin cycle, set the SOAK and WASH options to “0”, then select
a RINSE option (from 1 to 4) and a SPIN time (from 0-9 minutes). Then
proceed as described opposite.