LiveU LU200 User Guide
32
3
Navigate to a disabled interface using the Up and Down buttons on the
joystick and press the Right or Center (OK) buttons to display the
following screen:
Figure 32: Enable Interface
4 Press the Right or Center (OK) buttons on the joystick to enable the
selected interface.
Configuring WiFi
WiFi configuration can be performed directly on the LU200 unit itself or via
LiveU Central.
The status of a WiFi network is indicated, as follows:
•
Gray
: WiFi is disabled.
•
Yellow
: WiFi enabled, but is not connected.
•
Green
: WiFi is enabled and connected to the active network.
►
To configure the LU200 using the LU200 user interface:
1 Navigate to the Interfaces option in the Main screen using the Up and
Down buttons on the joystick.
2 Select WiFi
Select Network.
Figure 33: Select Network
