LiveU LU200 User Guide
22
Each LU200 uses a single channel for streaming over its interfaces to a specific
LU2000. The LU2000 can service multiple channels (each channel is an
LU2000 instance). The number of channels that it supports is dependent on
the processing power of the machine on which the LU2000 is running.
In order to connect to an LU2000 channel, you must select the channel to
which the LU200 will broadcast, as described below. This is a mandatory step
the first time that you use the LU200. Afterwards, the LU200 uses the same
channel unless you use the Channels option to change the channel.
►
To select a channel:
1 Navigate to Channels option in the Main screen using the Up and Down
buttons on the joystick.
2 Press the Right or Center (OK) buttons on the joystick. The Channels
screen displays, as shown below:
Figure 19: Channels Screen
3 Use the Up and Down buttons on the joystick to navigate to the preferred
channel, and then press the Center (OK) button on the joystick to select
it.
The selected channel is indicated by a checkmark.
NOTES
To cancel a selection, press the Left button on the joystick.
If a channel name is longer than the screen allows, two dots
are displayed at the end of the channel name.
After a few seconds the selected channel name starts to scroll so
that you can see the rest of the name.
