11
ASSEMBLY
STEP 9
A
Identify the Right pedal. Using a 15mm pedal wrench,
firmly tighten the Right pedal clockwise into the Right
Crank Arm. Repeat the same procedure for the Left
pedal but in a counter Clockwise motion.
NOTE
: Be careful to align the threads correctly to avoid damage. A
little grease on the threads should help the pedals to screw in easily
and correctly. turn the
LEfT
pedal spindle
COUNTERCLOCkwISE
when threading into the crank arm, and turn the
RIGHT
pedal spindle
CLOCkwISE
when threading into the crank arm.
make sure that all parts are properly tightened and that the brake
pad is thoroughly soaked with lubricant before the indoor cycle is
used. This precaution will avoid extensive wear on the brake pad.
To protect the floor or carpet, place a mat under the Indoor Cycle.
ASSEMBLY COMpLEtE!
