8
Removing the Bath Lift
1) Fold side flaps inward so that they are over the seat.
2) Use hand control to lower the bath lift and recline the backrest.
3) Disconnect the hand control.
4) Hold the top part of the backrest to fold the drive unit down.
5) Make sure the lifting rod is totally drawn back.
6) Remove the backrest from the seat unit.
NOTE: The backrest can only be removed at a specific angle. When it is completely folded down and
locked, it cannot be removed from the seat. Bring the backrest to the angle shown in the figure below.
7) Remove rear of the bath lift by pulling the tail of the rear suction cups. This action will loosen the front
suction cups so that the bath lift can now be removed from the bathtub completely.
