4
2) Make sure the tails of the front suction cups are tucked into slots on the underside of the baseplate.
However, the tails of the rear suction tubes should stick out. This makes it so the bath lift can be removed
from the bath with ease.
3) Make sure the bathtub is empty and dry. Remove any anti-slip mats or toys located in the tub.
4) Place the seat unit in the empty tub. Press down on the suction cups and wiggle seat unit slightly to make
sure the unit attaches to the floor of the bathtub firmly.
5) Insert the backrest into the seat unit.
NOTE: Make sure guide pins of the backrest are inserted into the bearing blocks located on the baseplate.
Please make sure the lifting rod is drawn back and pointing outward away from the backrest.
6) Tilt backrest backwards until the backrest is positioned at a reclined angle and the lifting rod is securely
fitted into the unlock ramp on the baseplate.
NOTE: Make sure the back of the backrest is not bumping against the wall of the tub. If the backrest hits
against the tub, the bath lift will need to be repositioned.
