LIVARNO LUX 14144702L, Инструкции по эксплуатации и безопасности

Страница: 13 / 49

13 GB/IE
Introduction / Safety Introduction
2 Screws
1 Suction cup
1 Set of assembly instructions and instructions for use
Parts description
1
Lamp head
2
LED light bulb
3
Suction cup
4
Flexible arm
5
Connection housing
6
ON / OFF toggle switch
7
Mains plug
8
Mains cable
9
Wall plug
10
Mounting bracket
11
Screw (connection housing)
12
Screw (mounting bracket)
Technical data
Model no.: 14144702L / 14144706L
Operating voltage: 230–240 V∼, 50 Hz
Light bulb:
1 x GU 10, LED max. 5 W
Bulb socket: GU 10
Protection class: II /
IP rating: IP20
Safety
Safety notices
Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
RISK OF FATAL
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND SMALL
CHILDREN!
Never leave children unattended with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, when
supervised or instructed in the safe use of the
device and they understand the associated risks.
Do not allow children to play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
RISK OF INJURY!
Do not leave the lamp or packaging material
lying unattended. Plastic film or bags, Styrofoam
etc. can become dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Always check the mains supply and the mains
plug for damage before connecting the light to
the mains. Never use the light if it shows any
signs of damage.
In the event of damage, repairs or other prob-
lems with the light, please contact the service
centre or an electrician.
Before drilling, ensure that there are no gas or
water pipes or power cables where you intend
to drill.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting socket).
This will pose a risk of fatal injury from electric
shock.
Only touch the insulated area of the mains sup-
ply and the mains plug when connecting to or
disconnecting from the mains!
Never use the mains lead
8
as a handle.
Do not kink the mains lead
8
or run it over
sharp edges.
To prevent hazards, if the external flexible lead
on this lamp is damaged, it must only be