LIVARNO LUX 14144702L, Инструкции по эксплуатации и безопасности

Страница: 15 / 49

15 GB/IE
Changing the ... / Maintenance and cleaning / Disposal / Warranty and service
Use a clean, lint-free, dry cloth to replace the
LED light bulb
2
.
Use the included suction cup
3
to remove the
faulty LED light bulb
2
by unscrewing it coun-
ter-clockwise from the bulb socket.
Only use the light bulb type specified in the
chapter „Technical data“.
Use the included suction cup
3
to carefully
screw the new LED light bulb
2
clockwise into
the bulb socket.
Check that it is positioned correctly.
Plug the mains plug
7
back into the mains
socket.
Maintenance and cleaning
Note: The device is maintenance-free.
RISK OF ELECTRIC SHOCK!
First remove the mains plug
7
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Unplug the mains plug
7
from the socket.
Only use a dry, lint-free cloth for cleaning.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Warranty and service
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect during the warranty period,
please send the appliance to the listed Service
Centre address, referencing the following item
number: 14144702L / 14144706L.
Wear parts (such as bulbs) and damage caused
by improper handling, non-observance of the oper-
ating instructions or unauthorised interference are
excluded from the warranty. The performance of
services under the warranty does not extend or
renew the warranty period.
Service address
Briloner Leuchten GmbH & Co. KG
Im Kissen 2
59929 Brilon
GERMANY
Tel.:
+49 29 61 / 97 12–800
Fax: +49 29 61 / 97 12–199
E-Mail: kundenservice@briloner.com
www.briloner.com
Safety / Initial use / Changing the light bulb