6 GB
Operation / Maintenance and Cleaning / Disposal / Warranty and Service
Introduction / Safety / Initial use
14103408L – max. 4 W
Protection class:
II /
Power factor
LED module (PF):
14103204L – 0.54
14103106L – 0.491
14103304L – 0.491
14103408L – 0.491
Rated current
LED module:
14103204L – 34 mA
14103106L – 35 mA
14103304L – 35 mA
14103408L – 35 mA
Q
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions!
No liability is accepted for consequent damage!
No liability is accepted for damage to property
or persons caused by improper handling or non-
observance of the safety advice!
To avoid danger to life
from electric shock
Every time before connecting the lamp the mains,
check it and the mains lead for damage. Never
use your light if you find it is damaged in any way.
CAUTION!
A damaged mains lead presents
a serious danger to life from electric shock.
In the event of damage, repairs or other problems
with the lamp please contact the service centre
or an electrician.
Never let the lamp come into contact with
water or other liquids.
Never open any electrical fittings such as in-line
switches, transformers etc. or allow any object
to be inserted into them. This sort of interference
can lead to a serious danger to life from
electric shock.
To avoid danger of fire and injury
RISK OF INJURY!
Check each light for
damage immediately after unpacking. If dam-
aged, please contact the service address for a
replacement.
RISK OF INJURY FROM BURNS!
Ensure the
lamp has been switched off and allowed to cool
before you touch it to avoid the danger of burns.
Never leave the spotlight operating unattended.
Fire can result from the development of too
much heat.
This light is not suitable for use as a night light.
Do not allow the lamp or the packaging materials
to lie around unattended. Plastic film or bags,
Styrofoam etc. can turn into dangerous toys for
children.
Do not attach the lamp to damp or conductive
substrates.
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instrument
(e.g. magnifier).
Not dimmable.
The illuminant in this light is not replaceable; if
the illuminant reaches the end of its life, replace
the entire light.
Working safely
Fit the light in such a way to ensure it is
protected from damp and dirt.
Do not attach this spotlight to pipes.
Q
Initial use
Ensure the installation site is clean and dry.
Clamp the spotlight on to a suitable object.
Note:
make sure that the anti-slip rubbers and
the bracket are secure.
Insert the mains plug
3
(attached to the mains
lead) into the mains socket.
Your spotlight is now ready for operation.
