18
Compound Rest Gibs
The compound rest also incorporates a gib for adjustment.
To adjust the compound rest gibs:
1.
Loosen the three lock nuts on the side of the compound rest.
2.
Slightly loosen all three setscrews on the side of the compound rest.
3.
Snug each setscrew equally. This will lock the compound rest in position.
4.
Loosen each setscrew 1/8 turn to allow the compound rest to move.
5.
While holding the setscrews from turning, tighten the lock nuts.
6.
Test by turning the handle. Loosen or tighten all the setscrews the same
amount until the compound rest moves freely, but without play in the
dovetail.
Apron Position
The apron is adjustable to center the half nuts horizontally on the lead screw.
To adjust the apron position:
1.
Loosen the two socket head cap screws that secure the apron to the
carriage. They are at the front edge of the carriage.
2.
Engage the half nuts on the lead screw.
3.
Tighten the two socket head cap screws.
Tailstock Position
The tailstock is adjustable from front to rear so you can align it with the
spindle.
Compound rest
adjusters
Apron adjusters
Содержание HiTorque 5100
Страница 42: ...42 Parts Diagram ...
Страница 47: ...Wiring Diagram ...
