manualshive.com logo in svg

LittleMachineShop.com HiTorque 5100, Руководство пользователя

Поделиться
Скачать
LittleMachineShop.com HiTorque 5100 Скачать руководство пользователя страница 12

12 

To power up the lathe: 

1.

 

Turn the speed control to the minimum speed position. 

2.

 

Place the forward/off/reverse switch in the off position. 

3.

 

Turn on the power switch by pressing the green button. 

To start the lathe: 

1.

 

Ensure that the speed control is set to the minimum speed position. 

2.

 

Move the forward/off/reverse switch to the appropriate position. 

3.

 

Advance the speed control to the desired speed. 

To stop the lathe: 

1.

 

Turn the speed control to the minimum speed position. 

2.

 

Move the forward/off/reverse switch to the off position. 

3.

 

If you want to power down the lathe, press the red switch to turn off the 
power. 

Power Feed Forward/Neutral/Reverse Lever 

The power feed forward/neutral/reverse lever controls the direction of 
rotation of the lead screw. When this lever is in the forward, or top, position 
the lead screw moves the carriage toward the headstock. When this lever is in 
the reverse, or bottom, position, the lead screw moves the carriage away from 
the headstock. In the center, or neutral, position the lead screw is disengaged 
and does not turn. 
There is a strong spring in this lever. Pull out firmly on the end of the lever 
while moving it.  

Power Feed Lever 

The power feed lever locks the half nuts around the lead screw, which engages 
the power feed. 
The power feed is engaged when this lever is down and disengaged when this 
lever is up. 

Carriage Hand Wheel 

The carriage hand wheel moves the carriage toward or away from the 
headstock, depending on which way it is turned.  
Use this hand wheel to position the carriage. Because this hand wheel moves 
the carriage quickly it is not easy to use this hand wheel to move the carriage 
while you are turning. 
You cannot turn this hand wheel when the automatic feed is engaged. 

Содержание HiTorque 5100
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды