Pre-cut Value Gambrel - 4’ & 6’ Sidewalls
AssEmbLy InsTruCTIOn mAnuAL
5
Assembly Instruction Manual
© 2020 Little Cottage Co.
*Please Note: a 4’ sidewall uNit was used for Pictures showN*
19.
Install the 7/16 OSB as shown. Making sure the OSB
top plate is flush on the bottom side (inside of wall), and
side.
20.
Lay wall off to the side as shown.
21.
Using the WaLL LayOUT DIagRaM sheet. Locate the
back wall plates, and studs, and lay them out as shown
in the diagram.
22.
Fasten the wall plates and studs together with 3”
nails, as shown.
23.
Using the WaLL LayOUT DIagRaM sheet..
Locate the truss pieces. Match truss A, B, and C. Secure with 3” nails.
