Page 4 of 8
Lites Profile C5 is delivered with a robust yoke that hosts 3 x 12 mm mounting holes.
The use of an adequate G-clamp to sustain at least twice the weight of the Lites Profile C5 (Lites Profile C5
weighs 7,5 kg) and/or M10 screw is mandatory. The use of safety chain(s) to sustain twice the weight of the
Lites Profile C5 is also mandatory; the safety chain adds more protections and safety to users and third
parties. Eye-lid for the safety chain is provided on the Lites Profile C5. The unit can be installed in any position
(See Fig)
Connection to mains
WARNING! Installation(s) must be accomplished, handled and carried out by qualified personnel
only and must comply & meet with all norms in force in the installation's country
Lites Profile C5 is supplied with a free Blue Neutrik PowerCon plug that must be wired using a 3x1.5mm² lead
Additional specifications include:
‒
Operating Voltage: 300/500V
‒
Test Voltage: 2KV
‒
Operating Temperature: -10°C / +35°C (- 14° F / +90° F)
Connect blue wire to N terminal, brown wire to L terminal and Yellow/Green wire to earth terminal. Ensure to
connect to safety circuit breakers at all times. When connected to 230VAC, daisy chain must not exceed the
quantity of 10 units and 5 units when connected to 110VAC. Maximum daisy chain cable length: 20m.
WARNING: NEVER CONNECT LITES PROFILE C5 ENGINE TO ANGLE PHASE DIMMER PACK
NOR TO NON- DIM MODE
POWER
IN
POWER
OUT
