Page 5 of 8
Signal control connection
Lites Profile C5 can be operated via either DMX512A and or RDM ready Protocols. For Daisy chain DMX line use
a-2 lead wire plus shield.
Red LED dot is on when DMX Input is available. DMX off line when LED dot is off
RDM – Remote Device Management
RDM Controller allows for remote standard operations
RDM default options include:
Discovery mode: RDM is active when controller detects this mode; the device reports the presence of the Lites
Profile C5 by giving a flash of light (Controller sets the device to a listing to read: settings, DMX address,
personality settings, i.e. DMX mode including all the above mentioned DMX values)
ON/OFF ”Identify”: This mode is to identify the manufacturer’s device (Lites srl) -Flash of light is to confirm
selection -
Model information (HPLED-BUCK)
Software version information (HPLED-BUCK v.x.xx)
Mode to reveal temperatures of the LED and of the driver
Mode to reveal hour-meters of the LED and of the device
Focus
Loosen knob 5 than adjust optics to focus
light projected
DMX XLR 5 Pin Assignment
Pin
Description
1
GND
2
DMX-
3
DMX+
4
Not connected
5
Not connected
5
