LITE-CHECK VERIFIER TRAILER INSPECTION SYSTEM
14. On any of these screens you may press the ”Note/Pic” icon at the bottom of the screen to enter
a note and/or take a picture for a specific item in the list. If you select ”General”, you can
optionally check the OOS box to mark an item that was not explicitly listed as OOS. Notes and
pictures appear in the final inspection report.
15. To move to a specific part of the inspection at any time, select ”Overhead View” from the menu,
then select the location you wish to visit (front, left, rear, right, undercarriage, and top). If you
loaded a previous inspection you can go to any point for review, but if this is a new inspection
you cannot select a point beyond your current progress, you must advance in sequence around
the trailer.
16. After the last screen (Top), a report summary will be displayed showing ABS details and a list of
OOS items, including notes and pictures if any. You may tap ”Submit” to send the report to the
Lite-Check Cloud for secure storage, reporting, analytics, viewing, and printing, or tap ”Modify” to
go back and repeat tests or modify selections and entered values.
A Note on Thresholds
The threshold at which measured values are considered out of service may be specified for tire
pressure, tread depth, brake pad/shoe thickness, and air leak rate (both emergency and
service). Any values
less than
the specified threshold will be considered OOS and marked as
such on the report (except, of course, for air leak, where values
greater
than the threshold are
OOS).
Thresholds can be changed on the Lite-Check Cloud by managers.
11
