LITE-CHECK VERIFIER TRAILER INSPECTION SYSTEM
ABS
Press the ”ABS” button on the tablet
•
Reads Haldex, Bendix, Meritor and Wabash ECUs
with PLC
through the AUXILIARY PIN 7
(with some exceptions–contact Lite-Check for details)
•
Includes support for Roll Stability and Advanced ABS
•
Displays all PLC ABS information on the Tablet screen for easy access
Steps of ABS operation
1. The VERIFIER will determine the condition of the
Brake
and
Auxiliary
circuits
2. The VERIFIER will determine if a
PLC signal
can be detected. If there is no signal, the operator
will be notified to exit the test
3. The VERIFIER will determine the manufacturer and ECU model
4. Additionally, it will determine the following information:
•
Configuration
•
Active Faults
The details for each fault can be listed There is a help feature available for each
fault (not available for Wabash)
•
Odometer
reading for that particular ECU
•
Trip odometer
reading, which can be reset (if supported by ABS model)
•
Serial Number
for that particular ECU
•
VIN
if available
•
ECU Voltage
if available
•
Wheel Speed
Displays real-time wheel speed reading as well as the highest RPM. Readings
will be reset when the test is exited.
•
ABS Load Test
Turns on all the lighting circuits and displays the voltage and current at the
VERIFIER as well as the ECU voltage, if it is available.
15
