Lister Petter LPP Series, Руководство оператора

Страница: 28 / 52

28
LPP PetRoL GeNset oPeRAtoRs' hANdbook
1.Change oil while engine is warm.
2.Place the generator unit on a level
surface.
3.Remove the oil filler cap or dipstick (3).
4.Open the oil drain plug (1) and let oil drain
completely into a pan placed under the
engine.
5.Check gaskets (2). Replace if required.
6.Reinstall the oil drain plug and refill engine with clean oil.
7.Replace the oil filler cap or dipstick.
Always use the best grade and clean oil. Contaminated oil, poor quality oil and
shortage of oil cause damage to engine or shorten the engine life.
AIR fILteR CLeANING
A dirty air cleaner element will cause starting difficulty, power loss, engine
malfunctions, and shorten engine life extremely. Always keep the air cleaner
element clean.
1. Urethane foam element type
Remove the element and wash it in kerosene or diesel fuel. Then saturate it in
a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Squeeze the
element to remove the mixture and install it in the air cleaner.
2. dual element type (Urethane foam and paper elements)
• Urethane foam cleaning
Wash and clean the urethane foam with detergent. After cleaning, dry it.
Clean the urethane foam every 50 hours.
• Paper element cleaning
Clean by tapping gently to remove dirt and blow off dust.
Never use oil. Clean the paper element every 50 hours of operation, and replace
element set if required.
Note:
Clean and replace air cleaner elements more often when operating in dusty
environments.
Replace the element in case that dirt or dust can not be removed and / or that the
element is deformed or deteriorated.
oIL RePLACemeNt