Lister Petter LPP Series Скачать руководство пользователя страница 2

Страница: 2 / 52

Statement of Indemnity

The information, specifications, illustrations, instructions and statements contained within

this publication are given with our best intentions and are believed to be correct at the time

of going to press.

Our policy is one of continued development and we reserve the right to amend any technical

information with or without prior notice.

Whilst every effort is made to ensure the accuracy of the particulars contained within this

publication, neither the Manufacturer, the Distributor nor the Dealer shall in any circumstances

be held liable for any inaccuracy or the consequences thereof. The information given is

subject to the Company’s current Conditions of Tender and Sale; is for the assistance of

users; and is based upon results obtained from tests carried out at the place of manufacture.

This Company does not guarantee that the same results will be obtained elsewhere under

different conditions.

Parts that have not been approved by the Lister Petter Power Systems organisation cannot

be relied upon for correct material, dimensions or finish. The Company cannot therefore

be held responsible for any damage arising from the use of such parts, and the guarantee

will be invalidated.

P027-10760

WARNING

READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND WARNING

MENTIONED IN THIS MANUAL.

WARNING

IMPROPER OPERATION OR MAINTENANCE PROCEDURES COULD

RESULT IN SERIOUS ACCIDENT OR DAMAGE TO THE EQUIUPMENT

CAUSING INJURY OR DEATH.

WARNING

NON-COMPLIANCE WITH THESE INSTRUCTIONS MAY INVALIDATE THE

WARRANTY.

WARNING

MAKE CERTAIN THAT THE ENGINE CANNOT BE STRTED IN ANY WAY

BEFORE UNDETAKING ANY MAINTENANCE, PARTICULARLY IN THE

CASE OF AUTOMATICALLY STARTING GENERATING SETS.

Содержание LPP Series





















































Результаты поиска

Содержание LPP Series

Отзывы:

Бренды по названию

Популярные бренды

Lister Petter LPP Series, Руководство оператора

Результаты поиска

Содержание LPP Series

Отзывы:

Бренды по названию

Популярные бренды