Lissmac COMPACTCUT 400 E, Руководство по эксплуатации

Страница: 9 / 45

9/45
1.1. Basics of intended use
1.1.1 The warranty obligation of the manufacturer and supplier is voided for improper or non-intended
use. Any change to the machine which is not carried out by the manufacturer is prohibited.
Changes, removal or addition of parts to the floor saw only with the written approval of the
manufacturer.
1.1.2 The machine is constructed according to the state of the art and recognised technical safety rules.
However, danger to life and limb of the user or third parties, and/or damage to the machine or other
property may still arise from its use.
1.1.3 Only use the machine in technically faultless condition and for intended use, aware of safety and
danger complying with the operating manual. You should particularly handle malfunctions which
can compromise safety immediately, or have them addressed by experts.
1.1.4 The LISSMAC floor saw is a floor cutting grinder and is designed exclusively for cutting grooves into
concrete or asphalt using water. Cutting uses saw blades and the machine may only be operated for
cutting of floors. The floor saw may only be operated by one person and is limited by proper
positioning at the rear part of the floor saw. Any other use or use above and beyond is not
considered intended use.
Intended use also includes compliance with the operating manual and observance of inspection and
maintenance manual.
1.1.5 Foreseeable misuse / non-intended use:

Cutting without saw blade protective hood

Cutting without water

Cutting of wood, plastic or metal (except for reinforcement in concrete).

Building changes, which alter the safety or the floor saw design type.
1.2. Organisational measures
1.2.1 The operating manual must be easily accessible for each person at the location of the floor saw.
1.2.2 All additions to the operating manual, all generally valid legal and otherwise binding regulations for
accident prevention and environmental protection are to be followed and instructed!
Such obligations may also apply, for example, to the handling of hazardous materials or the wearing
of personal protective gear or traffic regulations.
1.2.3 Personnel assigned to activities on the floor saw must have read and understood the operating
manual, particularly the Safety Instructions chapter, before starting work. In the middle of work it is
too late. This particularly applies to personnel only occasionally engaged with the crane, such as
those involved in tooling and maintenance.
1.2.4 At least occasionally, perform checks for safe and hazard awareness work by operators while
following the operating manual!