Lissmac COMPACTCUT 400 E, Руководство по эксплуатации

Страница: 14 / 45

14/45
1.5.2. Electric power
1.5.2.1 Use only original fuses with the specified current rating! In case of malfunctions, turn the floor
saw off immediately! Electrical work may only be carried out by technical and qualified personnel.
1.5.2.2 Carry out maintenance or repair work only when the motor of the floor saw is turned off and the
saw blade is not running any more. Transport position requires special care.
1.5.2.3 The machine's electrical equipment must be inspected/checked regularly. Faults such as loose
connections or damaged cables must be corrected immediately. The machine must be labeled so
that it cannot be started by others.
1.5.3. Dust
1.5.3.1 When working in close quarters, follow any applicable national guidelines!
15.3.2 To prevent dust build-up during cutting, the saw blade must be cooled using water. Dry cutting is
prohibited and damages not only the saw blade.
1.5.4. Noise
1.5.4.1 See 2.4 Noise power level of the machine
1.6. Transport
1.6.1 To implement using a crane, slinging equipment with sufficient load carrying capacity must be
used. Slinging equipment must be checked for damage before use.
1.6.2 Name expert instructors for the lifting process!
1.6.3 Lift the floor saw only according to the instructions in the operating manual and with proper lifting
gear!
1.6.4 Only use suitable transport vehicle with sufficient load capacity!
1.6.5 Secure loads reliably according to the regulations. Use suitable attachment points!
1.6.6 Even when moving only for a short distance, the motor of the floor saw must be turned off. The
saw blade may not be rotating before a restart!
1.6.7 When recommissioning, follow the operating manual!