Lissmac COMPACTCUT 400 E, Руководство по эксплуатации

Страница: 26 / 45

26/45
5.4. Cutting with the floor saw
Danger!
The floor saw may only be put into operation, if all starting preparations (see 5.2) are met. If this
is not possible, the operation of the floor saw is prohibited. Dry cutting without water is
prohibited!

Put the floor saw in position

Fold the steering rod downwards

Open the ball valve on the water tap

Start the drive motor:
To start up place the main switch of the saw blade to the "Star" position.
Once the motor has reached the maximum speed, place the main switch on the "Triangle"
position.

Introduce feed movement via the steering handle

Adjust the feed speed to the feed force
5.5. Cutting with an open saw blade protective hood.
Danger!
Removing or opening of the saw blade protective hood or reaching into the rotating saw blade
during cutting is prohibited. These works may only be carried out with the saw blade at a
standstill and the drive motor turned off.
Danger!
When cutting with an opened saw blade protective hood folded open the saw blade does not
cover the front area. Particular care is necessary!
The saw blade protective hood front on the floor saw can be raised.
This function is required to cut wall corners open.

Turn off drive motor and wait until the saw blade is not running anymore

Loosen the screws on the side of the saw blade protective hood (Pos. 2)

Fold the saw blade protective hood upwards (Pos. 1)

Tighten the screws for safety
Danger!
After cutting, the saw blade protective hood (Pos. 1) must be closed again immediately! Turn off
drive motor and wait until the saw blade is not running anymore.
1
2