8
Blue LED goes off when the
Bluetooth button is released
There is no SD card in the unit.
Suggested Actions on Error Condition
SD Card Error:
Check card is correctly inserted
Check card Lock Switch is in the unlocked position
Check card is not full
Check card is formatted as FAT16 (Windows refers
to this format as FAT)
Low battery
Replace the two batteries in the unit.
Download Failure:
Ensure that a Company, Control or Workshop card is
inserted in the VU and that vehicle ignition is
switched on. Retry download
Button Press Error: No action required - original download will continue.
Upload failure
Check that there are files to be uploaded
(If using phone) Check that the associated phone
is in Digidown Blue mode and check any message
on the phone’s display.
(If using Digidown Base) Check that the unit is in
range of the Digidown Base box
(If using Digidown Base) Check that the Digidown
Base box is enabled
Choice of Batteries
Use of alkaline cells is recommended. Ni-Cd or Ni-MH rechargeable
batteries may also be used. Please note that many types of rechargeable
battery do not perform well in low current applications and may self-
discharge in a few weeks. Also note that the two cells in the unit must be
of the same type.
Upgrade of the Digidown
The software within the Digidown can be upgraded when appropriate
without the need to return it to a dealer.
For more
information
please contact
Lisle Design Ltd, New Technology Centre,
North Haugh, St. Andrews KY16 9SR, Scotland
Tel. +44 (0)1334 471435 Fax +44 (0)1334 471438
E-mail [email protected] Web www.lisledesign.com
Digidown Blue Operating Instructions V1.6
© Lisle Design Ltd 2018
Subject to change without notice
