6
Run the app and follow the instructions on screen. The Setup Wizard
will start automatically the first time. It will perform an Internet
Check and a Bluetooth Check. Then it will prompt for your email
FROM name and address and it will send a Test email to confirm. If
prompted for a pass code while Bluetooth pairing with the Digidown
Blue use code
6543
.
Setup Remote Authentication Using Mobile
Phone
To perform VU downloads without a Company Card inserted in the VU
please first follow the instructions under section
“Setup Data Upload
Using Mobile Phone”
. Then, setup remote authentication following these
instructions:
Setup
Digidown Host
in PC with Smart Card reader
o
Download
Digidown Host
from the Support tab in:
lisledesign.com/products/digidown-blue
o
Connect card reader to PC
o
Run Digidown Host. Follow instructions on screen. You’ll create
a username and password.
Setup vehicles in
Digidown Host Portal
o
Login into
Digidown Host Portal
with username and password
created before > Go to lisledesign.com/DigidownHostPortal
o
Add an Installation > Go to My account. Click on Add
Installation
o
Add a new Company > Go to [Installation Name]. Click on Add
Company
o
Add the first vehicle > Click on the number of vehicles
registered to that company. Click on Add Vehicle. You’ll be
prompted for Vehicle Registration Number (VRN) and Vehicle
Identification Number (VIN).
o
If everything’s OK you’ll see two green lights on. You are now
ready to Download from VU without a Company Card inserted in
the VU.
Setup Data Upload using Digidown Base
Go to the Support tab in lisledesign.com/products/digidown-base for
instructions.
NOTE: As each data file is uploaded successfully that file is marked as having been
sent so that it will not be sent again next time. The original file is retained on the
memory card in case it is needed in the future
