background image

Rev: 06.29.22

Page 2

CCD-0004431

Introduction

The SolidStep® Levitate is a trailer entry step assembly that can be mounted to the side of any trailer, 

providing an ease of entry, regardless of level ground.
For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/steps-support-solidstep

.

Images used in this document are for reference only when assembling, installing and/or operating this 

product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, 

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This 

manual cannot begin to plot out instructions for every possibility, but provides the general instructions, 

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the 

provided instructions may result in death, serious personal injury, severe product and/or property damage, 

including voiding of the LCI limited warranty.

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause death 

or serious personal injury if not performed safely and within the parameters set forth in this manual. 

Failure to follow instructions provided in this manual may result in death, serious personal injury 

and/or severe product and property damage, including voiding of the component warranty.

TABLE OF CONTENTS

Introduction

 

2

Safety

 

2

Resources Required

 

3

SolidStep® Levitate Tread Width and Floor Height Variations

 

3

Prior to Installation

 

5

Installation

 

5

Secure Threshold Plate 

5

Lift Assist Installation for SolidStep Levitate Triple and Quad Step Assemblies 

7

Final Adjustment of the Transport Lock Latching Mechanism 

11

Operation

 

13

Release Steps 

13

Leg Extension Adjustment 

14

Secure Steps 

14

Optional Motion Sensor Lights

 

15

Содержание SolidStep Levitate

















Отзывы: