TME-EPIC-HURPM-R1V5.doc
Rev 1.5
Page 18 of 41
3.8
On Board Power Supply
The on board power supply generates all necessary voltages from the ATX compliant power supply
unit. To use a standard ATX 1.3 compliant power supply unit, an adapter is delivered with the board.
The 3.3V (also 5V, 12V, -12V)
available on the PC104 Plus Connector is delivered directly from the
external power supply unit, so refer to the specification of your power supply unit for information on
maximum available power on the PCI104 Plus connector.
ATX or single voltage (5V DC) supplies will be supported via an adapter cable.
Note
The power supply used must be able to deliver the specified inrush currents
Power Connector (standard usage and +5V-only)
Connector type: MOLEX 39299106 , 10 Pin ATX-Power connector (X7)
Backup Battery
There is a changeable battery on board, used to power the real-time clock if the power supply is
switched off.
Battery Type : CR2032, 3 Volts
Signal
Signal
Pin
Standard
5V only
Pin
Standard
5V only
5 + 3,3V DC
n.c.
10 GND GND
4 + 12V DC
n.c.
9 - 12V DC
n.c.
3 GND
GND
8 + 5V DC
+ 5V DC
2 GND
GND
7 + 5V DC
+ 5V DC
1 Power Switch ON
n.c.
6 + 5V DC Standby + 5V DC
Содержание Hurricane-PM
Страница 8: ...TME EPIC HURPM R1V5 doc Rev 1 5 Page 2 of 41 Block Diagram Figure 1 Block diagram of the Hurricane PM...
Страница 12: ...TME EPIC HURPM R1V5 doc Rev 1 5 Page 6 of 41 Top Figure 3 Connectors on top of the module...
Страница 13: ...TME EPIC HURPM R1V5 doc Rev 1 5 Page 7 of 41 Bottom LVDS Backlight Supervisory...
