Lippert Components Solera 434717 Скачать руководство пользователя страница 3

Страница: 3 / 16

lippertcomponents.com

574-537-8900

Rev: 11.17 - Solera

Universal Hardware Conversion

Solera

Universal Hardware

Manual Awning to

Solera Classic Manual Awning

(For Aftermarket Application)

Preparation

Resources Required

•

Additional Qualified Assistant

• Cordless or Electric Drill or Screw Gun
• Appropriate Drive and Drill Bits
• Socket Wrench
•

3/8

” Socket

• Rivet Gun
• Locking Pliers
• Ladder
• Silicone Sealant
• Non-permanent Method of Marking

Conversion

Dometic Manual Awning to Solera Classic Manual Awning

NOTE:

All screws supporting the awning assembly

MUST

have a backer within the structure of the wall of the unit.

NOTE:

Silicone sealant

MUST

be used on all screws and

holes to prevent water from infiltrating the unit.

NOTE:

This manual will refer to the “drive side” and “idler

side” throughout for various instructions. The “drive side” is

the right hand side of the awning when facing the awning

from the exterior of the unit. The “idler side” is the left

hand side of the awning when facing the awning from the

exterior of the unit.

With the awning fully retracted, make a non-permanent

marking on the roll tube

(Fig.1A)

indicating the position of

the cam lock

(Fig.1B)

NOTE:

This mark will assist in positioning the cam lock on

the Solera Classic Manual Awning.

Fig.1

Содержание Solera 434717

















Результаты поиска

Содержание Solera 434717

Отзывы:

Бренды по названию

Популярные бренды

Lippert Components Solera 434717, Руководство пользователя

Результаты поиска

Содержание Solera 434717

Отзывы:

Бренды по названию

Популярные бренды