Lippert Components LCI Level-Up, Руководство пользователя

Страница: 2 / 20

Rev: 11.18.19
Page 2
CCD-0001535
TABLE OF CONTENTS
Introduction 2
Safety 3
Prior to Operation 4
Selecting A Site
4
Touchpad Diagram 5
Gray 5
Black 5
Operation 6
Automatic Leveling Descriptive Logic
6
Automatic Leveling Procedure
6
Manual Leveling Procedure 6
Jack Retract Procedures
7
Leveling System Safety Features 7
Low Voltage Signal
8
Automatic Safety Shutoff
8
Drive Away Protection System 8
“Jacks Down" Alarm
8
For Diesel Units with Air Bag Suspensions ONLY: 8
User Alarm Mode
9
Level Zero Point Calibration 9
Manual Override 9
Manual Override - Jacks
9
Troubleshooting 12
Error Mode
13
Excess Angle
13
Maintenance 14
Fluid Recommendation
14
Component Description 15
Aluminum Jacks
15
Hydraulic Power Unit
16
12-Pin Wire Harness 17
Wiring Diagram 18
Hydraulic Plumbing Diagram 19
Introduction
The LCI Level-Up® Motorhome Leveling system is an electric/hydraulic system. A 12V DC power supply
drives a hydraulic pump that moves fluid through a system of hoses, fittings and jacks to level and stabilize
the coach.
The use of the LCI Level-Up® Motorhome Leveling System to support the coach for any reason other than
which it is intended is prohibited by Lippert's Limited Warranty. The LCI Level-Up® Motorhome Leveling
System is designed as a "Leveling" system only and should not be used to provide service for any reason
under the coach, such as changing tires or servicing the leveling system.
Lippert jacks are rated at a capacity appropriate for the coach. Each jack has a 9-inch diameter (63.52 inches)
footpad on a ball-swivel for maximum surface contact. Optionally, 12-inch diameter (1132 inches) footpads
are available.