Lionelo Bastiaan RWF, Руководство пользователя

Страница: 13 / 116

‑ 13 ‑ EN
The child safety seat can be set at five inclination angles (including one lying position when
rear-facing position is set). See: fig. 9.
To recline the child safety seat, grab the handle (P) located between the seat and base, and
set the desired inclination.
To set the child safety seat in a lying position, press the rotation key (L), rotate the seat by
180° and then set the backrest in a lying position.
HOW TO ASSEMBLE THE CHILD SAFETY SEAT IN THE CAR
A. HOW TO ASSEMBLE WITH A CAR SAFETY BELT
GROUP 0 (0 - 13 kg)
For this weight group the child safety seat is mounted in a rear-facing position, in lying
position. For instructions on how to adjust the child safety seat inclination, see: HOW TO
RECLINE CHILD SAFETY SEAT.
See: fig. 13
1. Place the child safety seat on the car seat.
2. Pull the car safety belt and pull the hip part under the seat liner (K) through the hip
belt guide (O).
3. Pull the shoulder part of the car safety belt through the shoulder belt guide (S).
4. Fasten the belt, tighten it as much as you can and make sure it is not twisted. Press
the child safety seat against the car seat.
5. Put the child in it.
After you have completed the assembly, make sure the belts have been carried through the
guides properly and have been fastened correctly. To do so, try to move the child safety
seat and check if it is stable.
GROUP I (9 - 18 kg) See: fig. 14.
For this weight group the child safety seat is mounted in a forward-facing position, in positions 1-4.
1. Place the child safety seat on the car seat.
2. Pull the shoulder part of the car belt through the shoulder belt guide (S).
3. Pull the hip part of the car belt through the hip belt guide (O).
4. Pull the shoulder belt behind the child safety seat backrest through the third guide (O).
5. Fasten the child safety seat.
6. Press the child safety seat against the car seat and pull the car belt as much as you can.
7. Put the child in it.
After you have completed the assembly, make sure the belts have been carried through the
guides properly and have been fastened correctly. To do so, try to move the child safety
seat and check if it is stable.
GROUPS II and III (15 - 36 kg)
For these weight groups, you have to disassemble 5-point belts of the child safety seat. The
child safety seat must be mounted in a forward-facing position.