Linx 7900 Скачать руководство пользователя | Manualshive

Страница: 8 / 81

background image

Safety

FA69315–3 English

(vii)

Linx 5900 & 7900 Quick Start Guide

Operating the printer

Linx ink jet printers have been designed to be as safe and easy to use as
possible. However, you could cause harm to yourself or damage to the
printer if you do not use it correctly.

Training

Linx believes that to use the printer with maximum safety and
effectiveness, you need good training. Linx or your local Linx Distributor
can provide a range of training courses to suit all operators.

If you are in any doubt about your ability to operate the printer safely, DO
NOT USE IT.

Appendix B, ‘Training’ lists the topics that, as a minimum, should be
included in operator training.

Safety precautions

Everybody who uses the printer must make sure that they know that ink jet
printers can be dangerous if not used correctly. The following safety
information must be made available to all personnel. The information is
essential to anybody who works with, or near, the printer.

For your comfort, Linx recommends that the printer is situated at least
600 mm above the floor level.

The following precautions are essential:

•

Take great care when you unpack or move the printer as it is very
heavy. ALWAYS follow the standard guidelines for the safe manual
handling of heavy objects when lifting the printer.

•

Always place the printer on its feet and on a level surface. Do not turn
the printer onto its side at any time.

•

Make sure that the electricity supply cable for the printer is correctly
connected to the supply and is well maintained.
NOTE: 5900 and 7900 printers supplied to India are fitted with a

mains electrical supply cable with free wires of 50 mm in
length. These wires must be connected by a suitably qualified
person to an IS1293 3-pin plug with a minimum 6 A rating .
The mains electrical supply cable must be connected to a
power supply of 230 V AC 1 A. The printer must be earthed.

•

ALWAYS make sure that the printer is disconnected from the
electricity supply before you clean it or perform any maintenance
tasks on it. When the electricity supply is connected lethal voltages are
present in the printer cabinet and printhead, which can cause serious
injury or death if the correct electrical safety precautions are not taken.

•

ALWAYS disconnect the external alarm (if fitted) from the alarm
output of the printer before any maintenance tasks are done.

«
...
6
7
8
9
10
...
»

Содержание 7900


















































































Отзывы:

Нет отзывов

Похожие инструкции для 7900

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: Ickle Bubba Страницы: 23

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Warren Controls Страницы: 28

Бренд: EAS Electric Страницы: 89

Бренд: Samson Страницы: 52

Бренд: Hanna Instruments Страницы: 54

Бренд: Hanna Instruments Страницы: 2

Бренд: Quinny Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды