Linx 7900 Скачать руководство пользователя | Manualshive

Страница: 10 / 81

background image

Safety

FA69315–3 English

(ix)

Linx 5900 & 7900 Quick Start Guide

•

Never look into the end of the printhead or point the printhead at
anyone while the printer is switched on.

•

Remove all spilt ink and solvent, or build-up of ink deposits
immediately, using the correct solvent type for the ink being used.

•

Store all inks and solvents in their original containers, which must be
tightly closed. Store the containers in a well ventilated cabinet or in a
recommended flameproof storage container. They must be kept away
from any source of heat.

First aid

Ideally, all operators should be trained in First Aid and should be aware of
the possible effects of working with flammable and toxic substances.

All operators must have access to the ink and solvent Material Safety Data
Sheets, which explain the hazards and the actions to be taken if First Aid is
necessary.

You must ensure that the First Aid information is readily available in the
event of ink and solvent contact with the eyes or skin, ingestion or
inhalation.

Procedures

The following paragraphs are the First Aid procedures for inks and
solvents taken from the Material Safety Data Sheets. For more detailed
information you should refer to the Material Safety Data Sheet for the
relevant ink or solvent.

Eye contact with inks or solvents

Remove contact lenses, if necessary, before flushing the eyes. Flush the
eyes with clean running water and continue to do so for at least 10 minutes,
holding the eyelids apart. Obtain medical attention.

Skin contact with inks or solvents

Remove any contaminated clothing. Wash the affected area thoroughly
with soap and water, or use a proprietary skin cleaner. Do NOT use
solvents or thinners to remove ink from skin. Obtain medical attention if
irritation occurs or persists after washing.

Ingestion of inks or solvents

If accidentally swallowed, DO NOT INDUCE VOMITING. Obtain
immediate medical attention. Rinse the mouth thoroughly with water and
give large amounts of water to drink if the person is conscious. Keep at
rest, and provide warmth and fresh air.

Inhalation of solvent fumes

Remove the affected person to fresh air immediately. If breathing stops,
administer artificial respiration and obtain immediate medical attention.
Keep the affected person warm and at rest.

«
...
8
9
10
11
12
...
»

Содержание 7900


















































































Отзывы:

Нет отзывов

Похожие инструкции для 7900

Бренд: Access Страницы: 12

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Gatekeeper Страницы: 28

Бренд: Haldex Страницы: 8

Бренд: HandyTrac Страницы: 14

Бренд: TA Страницы: 6

Бренд: u-blox Страницы: 28

Бренд: u-blox Страницы: 2

KOOL STRIDE KS-S

Бренд: KOOL-STOP Страницы: 8

ZITON RADIO LOOP MODULE

Бренд: EMS Страницы: 26

Бренд: Danfoss Страницы: 30

Бренд: KIPI Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды