Parametric EQ
The CronoX 3’s Parametric EQ (“Equalizer”) effect contains 2 independent
parametric equalizers. Each equalizer contains the following 3 controls:
Freq (“Frequency”), Gain and Q (“Quality”).
The Freq 1/Freq 2 (“Frequency 1/Frequency 2”) controls are used to set the
frequency at which the EQ operates. A range of 20 Hz to 11 kHz is
available.
The Gain 1/Gain 2 controls set the amount of gain that is applied to the
selected frequency. Note that the gain can be positive or negative. A
positive gain corresponds to boosting the signal while a negative gain
corresponds to cutting the signal. A range of -18 dB to +18 dB is available.
The Q 1/Q 2 (“Quality 1/Quality 2”) controls set the bandwidth of the
boost/cut. A large value means that a wider bandwidth is affected by the
filter. A range of 0.33 to 12 is available.
The two equalizer stages are in series with the second equalizer stage
(“Freq 2”, “Gain 2” and “Q2”) located after the first equalizer stage (“Freq 1”,
“Gain 1” and “Q1”).
C r o n o X 3
User Guide
53
