Page 25 of 29
Copyright © 2010 Linn Products Ltd.
5.
Carefully fit the grill and trim ring in position
ensuring the flat side of the grill is positioned at
the top as shown.
4.
Carefully fit the speaker in position ensuring
the wires were positioned under the unit
magnet before it is lowered into position.
Ensure the flat edges of the speaker unit are
facing the top and bottom of the cabinet as
shown.
Insert and tighten all 6 screws and washers
securing the drive unit.
Note: Check the mounting screws with the
torque tool set at 3.7Nm with the T20
Torx bit fitted.
6.
Refit the 3K Array as per the procedure in
APPENDIX 1.
