Page 24 of 29
Copyright © 2010 Linn Products Ltd.
4.
Unsolder the red and black wires from the
Drive Unit. The Drive unit can now be
removed.
Note: It may be advisable to protect the cabinet
from solder blobs or splashes while using the
soldering iron.
1.
Solder the red and black wires onto the drive
unit in the correct position.
Note: It may be advisable to protect the cabinet
from solder blobs or splashes while using the
soldering iron.
3.
After soldering and carefully rotate the speaker
to gently twist the wires together as shown.
FITTING THE UPPER SERVO BASS DRIVE UNIT
