To select mono operation (ie combine left and right channels) press the
MONO
button. The display shows the legend MONO. To return to stereo operation, press the
MONO
button again. The MONO legend is then extinguished.
NOTE A mono/stereo setting is provided for each input. When a new source is
selected, the mono/stereo state will be the last set for the source.
OPERATION FROM REMOTE CONTROL HANDSET
The LISTEN, REC, MONO and
MUTE buttons are identical in operation to those on the front panel.
To select the “volume” display mode and increase or decrease the volume setting
press the
VOL+
or
VOL-
buttons. If the display is not already showing the volume
level, a brief press of either button will select the volume display without changing
the level.
During the unmute operation, the increase in volume level can be stopped at any
point by pressing the
VOL+
or
VOL-
button, provided the display is in the “volume”
mode.
To select the “balance” display mode and shift the soundstage to left or right press
the
BAL L
or
BAL R
buttons. If the display is not already showing the balance
setting a brief press of either button will select the balance display without changing
the setting.
To centre the balance, press the
0
button on the handset (when the display is
showing the balance setting).
To select directly the desired listen or record source press the relevant button. In
any display mode other than “record”, pressing one of these buttons will select
the corresponding listen source and set the display mode to “listen”.
To record press the REC button, then the desired source button. To clear all record
sources, press the
0
button on the handset (when the display is in the “record”
mode).
SOURCE LEVEL EQUALISATION
The sources connected to the pre-amplifier may
have different output levels. For example, in general CD players have a relatively
MONO
VOL -, or VOL +
BAL L, BAL R
PH1, PH2, TUN, CD, TP1, TP2, AUX
ADVANCED FEATURES
9
KAIRN ENG PLACED 11/27/02 9:27 AM Page 14