LinMot S02-72/1000, Руководство по установке

Страница: 4 / 17

Installation Guide Power Supply ENG
Page 4 / 17 Type S02-72/1000 NTI AG / LinMot
2 Safety Instructions
2.1 Personal Safety
For your personal safety
Disregarding the following safety measures can lead to severe injury to persons and
damage to material:
•
Only use the product as directed.
•
Never commission the product in the event of visible damage.
•
Never commission the product before assembly has been completed.
•
Do not carry out any technical changes on the product.
•
Only use the accessories approved for the product.
•
Only use original spare parts from LinMot.
•
Observe all regulations for the prevention of accidents, directives and laws applicable on site.
•
Transport, installation, commissioning and maintenance work must only be carried out by qualified
personnel.
o
Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or
DIN VDE 0110 and all national regulations for the prevention of accidents.
o
According to the basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of the
product and who have the qualifications necessary for their occupation.
•
Observe all specifications in this documentation.
o
This is the condition for safe and trouble−free operation and the achievement of the
specified product features.
o
The procedural notes and circuit details described in this documentation are only
proposals. It is up to the user to check whether they can be transferred to the
particular applications. NTI AG / LinMot does not accept any liability for the
suitability of the procedures and circuit proposals described.
•
LinMot servo drives, power supplies and the accessory components can include live and moving parts
(depending on their type of protection) during operation. Surfaces can be hot.
o
Non−authorized removal of the required cover, inappropriate use, incorrect
installation or operation create the risk of severe injury to persons or damage to
material assets.
o
For more information, please see the documentation.
•
High amounts of energy are produced in the power supply. Therefore, it is required to wear personal
protective equipment (body protection, headgear, eye protection, hand guard).
2.2 Application as directed
•
LinMot power supplies are components, which are designed for installation in electrical systems or
machines. They are not to be used as domestic appliances, but only for industrial purposes according to
EN 61000
−3−2.
•
When power supplies are installed into machines, commissioning (i.e. starting of the operation as
directed) is prohibited until it is proven that the machine complies with the regulations of the EC Directive
2006/42/EG (Machinery Directive); EN 60204 must be observed.
•
Commissioning (i.e. starting of the operation as directed) is only allowed when there is compliance with
the EMC Directive (2014/30/EU).
•
The technical data and supply conditions can be obtained from the nameplate and the documentation.
They must be strictly observed.
2.3 Transport, Storage
•
Please observe the notes on transport, storage, and appropriate handling.
•
Observe the climatic conditions according to the technical data.
2.4 Installation
•
The power supply must be installed and cooled according to the instructions given in the corresponding
documentation.
•
The ambient air must not exceed degree of pollution 2 according to EN IEC 61800-5-1.